Jump to content
Melde dich an, um diesem Inhalt zu folgen  
Keiler979

Blaue LEDs im Radio

Empfohlene Beiträge

Hallo !!!

 

Vor ein paar Tagen hab ich mich drangemacht mein CD Radio Five auf blaue LEDs umzulöten . Sowohl Display als auch die Knöpfe leuchten , aber nicht mehr in der richtigen Reihenfolge ? Die Knöpfchen leuchten wenn ich das Abblendlicht einschalte , haben sie vorher nicht getan , da leuchtete nur das Display . Stört mich nicht weiter , aber wenn ich dann das Radio einschalte leuchtet das Display nicht .

 

Hab jetzt irgendwo gelesen das es mit Wiederständen zusammenhängen kann , bekommt das Display zu wenig Saft ? Bringt es was das Display auf rote LEDs umzurüsten da diese eine geringere Spannung brauchen oder muß ich Wiederstände entfernen ? Wenn ja , welche ?

 

Vielen Dank für eure hilfe ,

 

Liebe Grüße , Keiler

Diesen Beitrag teilen


Link zum Beitrag
Auf anderen Seiten teilen

Hey , vielen Dank :)

 

Wo findet ihr bloß solche Seiten , ich such mir immer nen Wolf . Egal , werd das mal ausprobieren wie der das gemacht hat und berichten obs funktioniert .

 

Liebe Grüße , Keiler

Diesen Beitrag teilen


Link zum Beitrag
Auf anderen Seiten teilen

Hallo

 

@Keiler979

 

Ich habe einen Smart Facelift und habe das

Stinknormale Radio mit CD Wechslersteuerung.

Würde auch gerne auf blaue Led´s umsteigen.

 

Kannst du mir mal schreiben welche

Led´s du benutzt hast. und wo du sie bestellt hast.

 

gruß unmogli.

Diesen Beitrag teilen


Link zum Beitrag
Auf anderen Seiten teilen

Erstelle ein Benutzerkonto oder melde dich an, um zu kommentieren

Du musst ein Benutzerkonto haben, um einen Kommentar verfassen zu können

Benutzerkonto erstellen

Neues Benutzerkonto für unsere Community erstellen. Es ist einfach!

Neues Benutzerkonto erstellen

Anmelden

Du hast bereits ein Benutzerkonto? Melde dich hier an.

Jetzt anmelden
Melde dich an, um diesem Inhalt zu folgen  

  • Der letzte Post

    • A easy way to realize the paddlesift without activation keys and programming already exists for Smarts with ZEE before BJ 2003. Look at this site! This little box will be connected in the cable connection between the SE Drive and the ECU. The paddleshift of the smart is based on the Voltage level of the horn connection. If you press the up oder down Button of the paddleshift, the voltage level of the horn connection assumes a defined value. The resistors in the paddles form a voltage devider and the voltage Level takes on a value depending on the resistors. The voltage level will be guided via the cicuit of the pcb. And the box will form the switching commands for the ECU. The switching commands to the ECU are based on the Informations of the Pins 3,4,5 and 8 from the SE Drive Unit. Pin 9 is for the sending of the switching mode Manual or Automatic to the ECU.   The Connections between the SE Drive and the ECU will bei listed on that site. And the complete connections of the ecu will be listed here.   I think it will be a problem to get a complete full schematic or circuit diagram of the SE Drive. 🥺          
  • Forenstatistik

    • Themen insgesamt
      153.456
    • Beiträge insgesamt
      1.619.759
×
×
  • Neu erstellen...

Wichtige Information

Wir haben Cookies auf Ihrem Gerät platziert, um die Bedinung dieser Website zu verbessern. Sie können Ihre Cookie-Einstellungen anpassen, andernfalls gehen wir davon aus, dass Sie damit einverstanden sind.