Jump to content
Melde dich an, um diesem Inhalt zu folgen  
HeikoD

Original CD-Radio für Smart

Empfohlene Beiträge

Hallo,

habe mir einen SMART-Cabrio bestellt, und bekomme Ihn Mitte November! Das Radio habe ich extra weggelassen, da ich gerne das Original CD-Radio (das im Creamstyle eingebaut ist) hätte!!!

Meine Frage: Weiß jemand, ab wann dieses Radio beim Smart Center erhältlich ist, und was es vorraussichtlich kostet ??????

Wäre für Info sehr dankbar

Gruß Heiko

Diesen Beitrag teilen


Link zum Beitrag
Auf anderen Seiten teilen

Hi Heiko,

die letzte Info, die ich gelesen habe, besagt, dass es im Dezember kommen soll.

Gründe hierfür liegen unter anderem daran, dass die Halterung für das CD-Radio modifiziert werden musste (sind zwei Blechschienen, die seitlich in den Radioschacht geklemmt werden und in die das Radio dann einrastet).
Bei der alten Halterung kam das komplette Radio aus der Halterung geflogen wenn der Beifahrerairbag auslöste :(
Beim Creamstyle wurden bereits vor Auslieferung mit einer neuen Halterung für das Radio ausgerüstet oder werden von den Centern angeschrieben um die Halterung nachzurüsten.


Über den Preis ist noch nix bekannt.
-----------------
Smarte Grüße

Elmar


Hier gibt es Infos zum smart-Forum-Team!

Diesen Beitrag teilen


Link zum Beitrag
Auf anderen Seiten teilen

Erstelle ein Benutzerkonto oder melde dich an, um zu kommentieren

Du musst ein Benutzerkonto haben, um einen Kommentar verfassen zu können

Benutzerkonto erstellen

Neues Benutzerkonto für unsere Community erstellen. Es ist einfach!

Neues Benutzerkonto erstellen

Anmelden

Du hast bereits ein Benutzerkonto? Melde dich hier an.

Jetzt anmelden
Melde dich an, um diesem Inhalt zu folgen  

  • Der letzte Post

    • A easy way to realize the paddlesift without activation keys and programming already exists for Smarts with ZEE before BJ 2003. Look at this site! This little box will be connected in the cable connection between the SE Drive and the ECU. The output of the SE Drive is the Input of this box and the connection to the ECU is the output of this box.   The paddleshift of the smart is based on the Voltage level of the horn connection. If you press the up or down Button of the paddleshift, the voltage level of the horn connection assumes a defined value. The resistors in the paddles form a voltage devider and the voltage Level takes on a value depending on the resistors. The voltage level will be guided via the cicuit of the pcb. And the box will form the switching commands for the ECU. I think your logic board should have the same functions to modulate the switching commands like this box, in this case based on the signals of your Paddle Receiver Module. The switching commands to the ECU are based on the Informations of the Pins 3,4,5 and 8 from the SE Drive Unit. Pin 9 is for the sending of the switching mode Manual or Automatic to the ECU.   The Connections between the SE Drive and the ECU will bei listed on that site. And the complete connections of the ECU will be listed here.   I think it will be a problem to get a complete full schematic or circuit diagram of the SE Drive. 🥺 This is a well-kept secret of Mercedes/Brabus.
  • Forenstatistik

    • Themen insgesamt
      153.456
    • Beiträge insgesamt
      1.619.759
×
×
  • Neu erstellen...

Wichtige Information

Wir haben Cookies auf Ihrem Gerät platziert, um die Bedinung dieser Website zu verbessern. Sie können Ihre Cookie-Einstellungen anpassen, andernfalls gehen wir davon aus, dass Sie damit einverstanden sind.